Chimcare Round Rain Cap

Rain Stops Here. Period.

The Chimcare Round Rain Cap is built for one job and built to do it better than anything else on your roof: keep water out of your flue. The signature pagoda-style hood sheds rain, sleet, and snow before a single drop reaches your chimney interior, while the stainless mesh cage underneath blocks everything else trying to get in. Fabricated from premium 304 stainless steel right here in the USA, this is the cap that finally ends the slow drip-drip damage rotting your damper, rusting your smoke shelf, and shortening the life of your chimney.

Key Features:

• All-Weather Rain Protection – The conical stainless steel top is shaped to shed rain, snow, sleet, and windblown debris before it reaches your flue opening. Keeps moisture out to prevent rust, mold, and costly water damage inside your chimney system.
• Protective Mesh Screen – Built-in stainless steel mesh screen keeps birds, squirrels, raccoons, and other animals from nesting inside your chimney. Also blocks leaves, twigs, and windblown debris that can cause dangerous flue blockages.
• 304 Stainless Steel – Heavy-gauge marine-grade stainless steel resists rust, corrosion, and UV damage in all weather conditions, from coastal salt air to mountain snowfall. Built to last for decades, not seasons.
• Made in USA – Every Chimcare rain cap is proudly manufactured in the United States with welded construction, not cheap pressed metal from overseas.
• Limited Lifetime Warranty – We stand behind every cap we make. If it ever fails, we make it right.

One Cap That Outlasts Your Roof

The bargain cap on the left is what most homeowners end up replacing every other winter – flimsy 24-gauge steel, spot welds, rusted mesh, a hood that bends in the first storm, and a finish that stains the brick below it. The Chimcare Round Rain Cap on the right is TIG-welded 304 stainless steel, built in our USA facility, and engineered to outlast your roof. You can keep buying imports over and over, or you can buy one Chimcare cap and be done.

Specifications:

Materials Matter. We Picked the Best.

Chimcare builds every Round Rain Cap from 304-grade stainless steel – the same alloy used on marine rails and commercial kitchens. It resists rust, salt air, creosote, and UV for decades, not seasons. The cheap stainless caps flooding the market are usually 430-grade, which pits and stains within two winters. And galvanized steel? The zinc coating burns off and the steel underneath rusts through. When you buy Chimcare, you are buying the material that actually lives up to the name.

What It Fits

The Chimcare Round Rain Cap is designed to fit inside insulated double-wall stovepipe, which is the most common type used for wood stoves. Not sure which flue type you have? Look down into your chimney from the top. If you see a round opening from a single-wall metal pipe, insulated stovepipe, or clay liner, this cap is for you.

Eight Sizes. One Design. Zero Guesswork.

Measure the inside diameter of your inner flue pipe and match it to one of our sizes: 3″, 4″, 5″, 6″, 8″, 9″, 10″, or 12″. These cover virtually every residential stove pipe, wood stove flue, and single-wall chimney on the market. If you are between sizes, round up – and if you are unsure which you have, pop your existing cap off and measure the inner pipe before you order. No adapters, no shims, no guesswork.

Available Sizes & Pricing:

Installs in Minutes. No Special Tools Required.

Installation is stupidly simple.

Step 1 – Measure the inside diameter of your inner flue pipe.
Step 2 – Select the matching Chimcare size.
Step 3 – Insert the cap collar onto your pipe and tighten the built-in set screws.

That is it.

No drilling, no sealant, no adapters, no trips back to the hardware store. Most homeowners are done in under five minutes.

What’s Included:

• 1 x Chimcare Round Rain Cap (304 stainless steel)
• Built-in friction-fit base (no separate mounting hardware needed to attach chimney cap to chimney pipe)
• Base + Screen Mesh + Lid
• Installation Instruction Card

How to Measure & Install:

• Step 1: Measure – Measure the inside diameter of your round flue pipe. Place your tape measure across the widest point inside the pipe opening.
• Step 2: Select – Choose the cap size that matches your measurement.
• Step 3: Assemble – Attach the lid to the base using the included nuts and bolts.
• Step 4: Insert – Slide the assembled cap into the top of your flue pipe. The friction-fit base grips securely. Done.

No Uninvited Guests. Ever.

Birds nesting. Squirrels dropping into the firebox. Bats roosting where they do not belong. Leaves clogging the flue in October and catching fire in December. A chimney without a proper cap is an open invitation – and the damage, the smell, and the emergency calls to your chimney sweep add up fast. The Chimcare Round Rain Cap wraps the entire flue opening in a heavy stainless mesh cage, turning your chimney into a no-fly zone while keeping smoke flowing exactly the way it should.

The Chimcare Promise

Chimcare Chimney Caps is a family-owned American manufacturer. Every Round Rain Cap is fabricated, welded, and inspected right here in the USA – not drop-shipped from an overseas warehouse we have never seen. We build it from premium 304 stainless steel and stand behind every cap we ship. Real people, real rooftops, real quality control. Buy once. Install once. Done.

Every Chimcare product is manufactured right here in the United States from 304 marine-grade stainless steel. We use welded construction on every cap, not stamped or pressed metal that warps and fails. Our caps are trusted by professional chimney sweeps and installed on thousands of homes across the country. And every single one is backed by our limited lifetime warranty.

Compatible Stovepipe Manufacturers

• DuraTech
• DuraVent
• All-Fuel
• Ventis
• Selkirk
• HeatFab
• Imperial
• AmeriVent
• Superior
• Metalbest

Compatible with most major manufacturers.