High Wind Non-Air Cooled Chimney Cap

Where the Wind Gives Up First

Most caps flinch at the first real gust. The Chimcare High Wind Non-Air Cooled Chimney Cap does not. Built specifically for solid-pack and single-wall chimney pipe, this cap stands its ground against 70+ mph winds thanks to a tall high-wind hood, a reinforced stainless base, and built-in standoff fins that lock it onto your pipe without play. If you live on a coast, a hilltop, or any rooftop that actually sees weather, this is the cap you want between your flue and the storm.

Wind-tested to withstand 70+ mph winds, this cap stays put when everything else on your roof is flapping. Premium 304 stainless steel, TIG-welded in our USA facility, and custom-built to fit your exact inner pipe diameter.

Performance Benefits: Prevents wind from going down the chimney flue. Eliminates cold and unwanted downdrafts. Blocks rain from entering the chimney flue. Maintains proper ventilation for solid pack systems. Provides superior protection in high-wind areas.

Q: What kinds of wind conditions is this cap rated for?
This high-wind, non-air cooled cap is engineered in premium stainless steel and built to withstand hurricane-level gusts, ensuring stability and draft protection even during severe storms.

One Cap That Outlasts Your Roof

The bargain cap on the left is what most homeowners end up replacing every other winter – flimsy 24-gauge steel, spot welds, rust bleeding down the flue, and a finish that stains the brick below it within a single season. The Chimcare High Wind Non-Air Cooled cap on the right is TIG-welded 304 stainless steel, built in our USA facility, and engineered to outlast your roof. You can keep buying imports over and over, or you can buy one Chimcare cap and be done.

Construction Details: Premium stainless steel construction. Custom manufactured for each order. Designed specifically for non air cooled (solid pack) chimney systems. Engineered for high wind resistance.

Materials Matter. We Picked the Best.

Chimcare builds every High Wind Non-Air Cooled cap from 304-grade stainless steel – the same alloy used on marine rails and commercial kitchens. It resists rust, salt air, creosote, and UV for decades, not seasons.

The cheap stainless caps flooding the market are usually 430-grade, which pits and stains within two winters. And galvanized steel? The zinc coating burns off and the steel underneath rusts through. When you buy Chimcare, you are buying the material that actually lives up to the name.

Product Features:

• Made in the USA
• Lifetime Warranty
• Stainless Steel High Quality Non Air Cooled / Solid Pack Chimney Cap
• Built to withstand very high wind conditions
• Slips inside the interior pipe – measure the inside dimension before ordering
• Designed exclusively for Non Air Cooled / Solid Pack Chimneys Only

No Air Gap in Your Chimney? No Problem.

Here is where Chimcare solves the problem most cap manufacturers ignore. If your chimney is solid-pack or single-wall pipe, a standard high-wind cap clamps directly onto hot metal – and that is a thermal code issue waiting to happen. Our cap is engineered differently. Built-in standoff fins create a thermal-safe air gap between the cap body and your pipe, so the hood can shed wind and weather while keeping heat off the surrounding structure. It is the same wind-beating performance as our air-cooled line, engineered specifically for pipes that were never designed for it.

Five Sizes. One Design. Zero Guesswork.

Measure the inside diameter of your inner flue pipe and match it to one of our five sizes: 5″, 6″, 8″, 10″, or 12″. These cover virtually every residential solid-pack and single-wall chimney pipe on the market. The 8″ is our fits-all size and covers the most common fireplace and stove installations. If you are between sizes, round up – and if you are unsure which you have, pop your existing cap off and measure the inner pipe before you order.

Available Sizes and Pricing:

• 5 Inch – $425.00
• 6 Inch – $485.00
• 8 Inch – $590.00
• 10 Inch – $625.00
• 12 Inch – $699.00

Installs in Minutes. No Special Tools Required.

Installation is stupidly simple.

Step 1 – Measure the inside diameter of your inner flue pipe.
Step 2 – Select the matching Chimcare size.
Step 3 – Insert the cap collar onto your pipe; the built-in standoff fins center it automatically and the set screws lock it in place.

That is it.

No drilling, no sealant, no adapters, no trips back to the hardware store. Most homeowners are done in under five minutes.

Installation Requirements:

• Measure the inside dimension of the chimney pipe for proper fit
• Compatible with Non Air Cooled / Solid Pack chimney systems only
• Cap slips inside the interior pipe for secure installation
• Professional installation recommended

The Chimcare Promise

Chimcare Chimney Caps is a family-owned American manufacturer. Every High Wind Non-Air Cooled cap is fabricated, welded, and inspected right here in the USA – not drop-shipped from an overseas warehouse we have never seen. We build it from premium 304 stainless steel and stand behind every cap we ship. Real people, real rooftops, real quality control. Buy once. Install once. Done.

Warranty Information: Each high wind flue cap includes a comprehensive lifetime warranty covering manufacturing defects and construction quality.

Compatible Stovepipe Manufacturers

• DuraTech
• DuraVent
• All-Fuel
• Ventis
• Selkirk
• HeatFab
• Imperial
• AmeriVent
• Superior
• Metalbest

Compatible with most major manufacturers.